View Single Post
      10-16-2012, 05:30 PM   #10
Sully1Time
Second Lieutenant
Sully1Time's Avatar
United_States
109
Rep
249
Posts

Drives: 18' MR440i
Join Date: Aug 2012
Location: SoCal

iTrader: (7)

Garage List
Quote:
Originally Posted by THE TECH View Post
No reason to upgrade from HiFi to EP. Just get the harness and use aftermarket amps.
Quote:
Originally Posted by NYC M3 View Post
U think it will be good enough? I already got the JL xd600/6 amp and about 2 get the harness.
Stock mids & tweets will only take so much power. Plus the tweets still sound like cheap tweeters even with some power. I would go musicarnw or eps, I'm going with hybrid audio legatia series as I'm after some big improvements.

Does technic have access to the sub spacers?

Yes the SWSXi are 2 ohm, really made for direct replacement of the factory eps subs without changing the stock amp. If your going with the 600/6 you can use either the 2 or 4 ohm as the amp will work with both. But it makes 100watts at 2 ohms & 75 watts at 4ohms or 200 watts mono at 4 ohm.

I would buy the swsxi 2 ohm if I were you, you'll get the most power in stereo and are able to wire them in series for a 4 ohm mono load if you go mono
__________________
24' DRAVIT GREY M60I MSPORT, MODS SURELY TO COME
Appreciate 0