Quote:
Originally Posted by Richard@M-World
This probably just means that you are working your tires to the maximum!
When I ran 3+ degrees of camber with AD08, the outer edge still wore out just like yours. Sometimes with a heavy car like ours, outer edge wear is unavoidable. It may help to control the platform more by adding springs/roll bars, but probably not something you want to do on a street car.
|
I'll go with that
I already have 514/800# springs, but stock front bar. Do you think a stiffer bar would help?
I've also had thoughts that the stiff rebound of my dampers is contributing, but backing it down a few clicks made it understeer to the point that I didn't care about tire wear, I had to change back.