Quote:
Originally Posted by M3SQRD
Is it possible to swap from 60 mm to 2.25" ID springs on KWs (lower spring seat/collars, helpers and couplers also would need to be changed)? Now that I've switched dampers and am using 2.25" F springs I have just enough additional clearance to switch to a 10" F wheel, if needed, and still use helper springs/couplers.
|
I just measured a KW spring perch and it came in at 2.40" dia. Depending on the true ID of a 2.25" spring, it may or may not work, but most likely the latter.