View Single Post
      06-20-2012, 11:57 AM   #11
slicer
Major General
slicer's Avatar
2739
Rep
6,734
Posts

Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m

iTrader: (39)

Don't worry about a small amount of rubbing... If you go with the tire sizes I listed in Yokohama AD08 (the Yokohama's run very wide but they are sticky) you will need to make some camber adjustments to make it work. The fronts may rub at full-lock and the rear may hit the inside of the fender a little. The end result is worth it IMO. The 9.5" LM is a 32 offset so you may not need to make as much of a camber change as I did (my wheels are 22 mm offset - stick out 10mm more than the LM's). Plus the 11" rear wheel may actually help you because the tires will be more stretched than my 10.5's.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc.
INSTAGRAM - @Slicer_M
Appreciate 0