View Single Post
      06-19-2011, 09:09 PM   #1
SlamMan's Avatar

Drives: ED 5/19/2010, Interlagos E90
Join Date: Sep 2009
Location: Denver, 303

iTrader: (1)

Need Help with Ground Control Conversion Kit Install

I know this isn't a technical section but I'm hoping it gets seen by someone who's installed this kit since I've got the front of my car completely torn apart now.

I'm questioning where the sway bar link bracket should sit on the body of the shock absorber. I marked the stock bracket per the instructions but, because the diameter of the shock body gets bigger (pic 2) a little ways from the top, when lining up the GC bracket to the stock mark it doesn't make much contact with the body of the shock except at the very bottom (pic 3).

I'm also unsure how long to set the sway bar links.

Any help is greatly appreciated. I'm taking lots of pictures so once I'm done I'd like to put together a DIY write up.
I play real sports. Not tryin' to be the best at exercising. - Kenny Powers