Originally Posted by tom @ eas
Wiring should be the following:
PIN2 from Module >> PIN15 on EDC connector
PIN10 from Module >> PIN14 on EDC connector
PIN3 from Module >> Red wire removed from EDC connector (BMW harness)
PIN11 from Module >> Blue/Red Wire removed from EDC connector (BMW harness)
Power/Ground can be obtained from the white connector:
PIN1 = +12V Power
PIN6 = Ground
Hope this helps.
Tom, thanks for the reply. How does the mini USB port work to switch the emulator on and off? Could that be my problem? I'll check to make sure my connections are what you have listed. I think they are correct except I went to the battery for the power/ground. My tech has been trying to get in touch with Macht Schnell for two days now and hasn't heard back from them.