-2.5 camber in front using Dinan camber plates and -2.3 rear I believe. My setups have constant temps across the tread, good wear patterns, and outside shoulder wear just takes off the tip of the wear triangle. I have yet to run across anyone tracking a M3 using hot temps as high as yours, but if it works for you, that's great.
Originally Posted by aleckzandr
+1 And do tell us your camber. I would destroy my front tires' outside shoulder with pressure so low. I ran my AD08s at 46-48 hot, 38 cold with -2.2d front camber last year, and tire wear was still just at the triangle markers.
Thanks for link TrackRat.
Edit: I do want try lower pressures this year because I've increased negative camber all around.