View Single Post
      04-08-2011, 05:13 AM   #4
Technic
Lieutenant General
 
Technic's Avatar
 
Drives: 2012 E92 M3, 2014 528i
Join Date: Apr 2005
Location: Ft Lauderdale, Florida

Posts: 10,979
iTrader: (17)

Garage List
2004 M3  [0.00]
1. Your system is the HiFi therefore the OEM HU output signals are balanced, low level, flat and high voltage. No need for LOC, line drivers or processing as long as you use balanced signals-compatible amps/EQ.
2. Your E90 front doors accept speakers or up to 54mm deep. The Morel are 50mm deep.
3. The bit one.1 accept balanced signals directly into its RCA sockets.
4. You could start with an amp upgrade, new speakers and see if you like the sond without any DSP. But you will need at least a 5-channel amp if you replace the OEM amp (6-channels output), with the SWS-8 connected in Mono.
5. I sell a HiFi harness kit with the OEM amp and all speaker OEM connectors so no OEM wires would be cut, spliced or tapped to replace the OEM amp and the speakers. PM for details.

Quote:
Originally Posted by DavidZ View Post
Hi there. I just joined the forum but I've been reading a lot of threads about audio upgrade options for my '11.5 E90 M3 with base "HiFi" audio. I'm fairly well versed in the car audio world having done several installs myself but I'm totally new to BMW. I'd like to replace the stock amp with a 5 or 6 channel one powering all new speakers in the stock locations. I've decided on Earthquake SWS 8s. Front doors will probably be Focal K2 Power 100KRS for ease of installation unless someone can convince me that the Morels are an easy install. I've read that the Morels require that the speaker grill tabs be cut and the grill be stuck to the speaker with Dynamat or whatever and, well, I like things to be fastened a little better than that. Is that only on the coupe though? Are the Morel's a "drop in" install on the sedan? What about the tweeters? Rear speakers are not a concern right now.

So anyways like the title says my question is really about what amp to choose. I definitely want one that will accept the balanced differential inputs from the HiFi system, but I'm not sure if I want an amp with internal sound processing or not. I could save a bit of money by getting a DC650.6 now vs. getting a REF650.6 or JL HD900/5 and an external processor later (to tune for a flat frequency response). Problems I see with the Zapcos are size and availability. Only problem with the JL is no equalization and I prefer class AB to class D. If I did go with a straight amp, if I found the sound did need equalization, not sure which processor to get. Which accept balanced differential inputs? I'd rather not use any kind of line converter. I think I read the Audison Bit One can't accept the BMW's output? Or was that for the EP or L7 system? I don't really like the JBL system as I have no use for its 8 channel amp and I dislike unnecessary features. Does anyone with similar setups even need equalization? Any advice would be greatly appreciated.

Thanks
__________________
-2015 F30 320i, Imperial/Oyster, 8AT: August 2014 ED
-2012 E92 M3 Jerez Black/Rust Brown, M-DCT: September 2011 ED
-2008 E90 M3 Melbourne Red/Bamboo, 6MT: Gone
-2007 MK5 GTI United Grey/Grey, DSG: Gone
-2004 E46 M3 Carbon Black/Cinnamon, 6MT: Gone
Technic is offline   United_States
0
Reply With Quote