Originally Posted by mastek
Wait - what 8ohm units? The SWS-8s come in 2 or 4 ohm
I def want to get a D-Class Amp ...i just dont know which one will give me the best result.
1- SWS-8 (4ohm) in Stereo with an Alpine D-Class 2x150w
2- SWS-8 (2ohm) in Series with an Alpine D-Class 1x300
Or what else...?
Wow ... i didnt know the OE underseat subs were set between 200-250hz ...that explains alot. How would I change the crossover output from the OE Amp with just an additional Amp and a LOC from Technic?
4ohms in Stereo (2-channels) = 4ohms total impedance per channel
4ohms in Mono (single channel/Parallel connection) = 2ohms total impedance
4ohms in Mono (single channel/Series connection) = 8ohms total impedance
2ohms in (single channel/Parallel connection) = 1ohm total impedance
2ohms in (single channel/Series connection) = 4ohms total impedance
The amp chosen to drive the SWS-8 is determined by the total impendance to be driven per channel.
-2015 F30 320i, Imperial/Oyster, 8AT: August 2014 ED
-2012 E92 M3 Jerez Black/Rust Brown, M-DCT: September 2011 ED
-2008 E90 M3 Melbourne Red/Bamboo, 6MT: Gone
-2007 MK5 GTI United Grey/Grey, DSG: Gone
-2004 E46 M3 Carbon Black/Cinnamon, 6MT: Gone