Originally Posted by paintpro21
If you're going for a street only setup, then you may not want that much front rubber to cut down on tramlining. The 18x9.5" et22 wheel with a 265 would be a better option. The offset would make it a flush setup. I don't have photographs of this fitment at this time, but will post them as soon as possible.
Most people don't install TPMS sensors for track day wheels and just ignore the simple light on the dash.
I kind of like having the TPMS sensors at the track. I haven't had any issues with but a friend of mine did with a tire and it was an early warning. Less concerned on the street really, as I don't drive 150mph there.