** - Tecnocraft E9X ///M3 Envy™ ChargePipe
Recently removed from my M3..... Takes approx 10mins to fit.
Full information can be found here: http://www.tecnocraft.com/Tecnocraft...ePipe-P22.aspx
Tecnocraft's long-standing proprietary dry carbon fiber production techniques officially debuted in 2007, but for nearly two decades, Tecnocraft’s heritage, and experience has embraced a singular philosophy rivaling Formula One, Military Defense, and Aerospace carbon composite manufacturing. Their philosophy is function over form.
Carefully observing the needs of performance enthusiasts needs and motor sports trends, Tecnocraft brand products are specifically developed for the exotic aftermarket niche a chosen challenge by their in-house design team to continually meet the demands and expectations of the most discerning consumers in the automotive industry today.
-The 4th and Final Stage of the ENVY™ Intake System is the ENVY™ intake system’s most highly sought after, direct replacement of the factory rubber chamber before the intake manifold. The ENVY™ ChargePipe eliminates the final and most important choke point in air intake charge while dramatically reducing turbulent airflow. Its extremely organic 100% Dry Carbon design allows for the largest and smoothest transition of air from the entire intake system, complimenting even the factory E9X ///M3 intake system where it is most needed. The ChargePipe is our featured highlight product of the ENVY™ intake system and is suggested by TECNOCRAFT to be a first investment towards a complete ENVY™ intake system if purchased as a standalone product. The ENVY™ ChargePipe has been specifically paired with a BMC filter as a perfect combination upgrade for the most noticeable throttle response, horsepower and torque gains of the entire ENVY™ system.
Tecnocraft introduces its first major step into European mass-market product in their release of the TECNOCRAFT E9X ///M3 ENVY™ Intake System. Designed from the ground up, all in-house, with a performance build strictly in mind, our dry carbon fabrication team set to work in producing the most comprehensive quality intake system BMW E92 ///M3 owners (and would-be owners) have ever seen. And with the consumer in mind, this completely modular system consisting of four, separate and equally functional, pieces fabricated in 100% Dry Carbon (or in Carbon/Kevlar special edition for an added cost) can find its way into your ///M engine bay over time.
With organic design elements taken from the highly praised TECNOCRAFT Lamborghini Gallardo ‘Hi-Flow Intake System’, keeping optimal airflow dynamics was a primary concern – having also been developed in 100% Dry Carbon, our intake systems are natural heatshields and do their part to greatly reduce heatsoak. All parts of the ENVY™ system have been enlarged by at least 30% in volume, designed with smoothly transitions, and reduced in weight (if not all three at the same time) to ensure every ounce of horsepower can be gained while naturally aspirated.
The TECNOCRAFT E9X ///M3 ENVY™ Intake System is aptly named and priced quite right for the discerning E9X M3 owner – have the most complete and comprehensively designed, 100% Dry Carbon intake system in the BMW aftermarket and make all the rest of them jealous. Available today at http://www.tecnocraft.com or at your local TECNOCRAFT dealer.
£290.00 Delivered - Mainland UK Please contact for Oversea Shipping Costs.