View Single Post
      10-30-2010, 06:30 AM   #65
Lieutenant General
Technic's Avatar

Drives: 2015 320i
Join Date: Apr 2005
Location: Ft Lauderdale, Florida

iTrader: (18)

Originally Posted by Robertyu View Post
There is no way 3 original PDX amps will fit side-by-side in there. I checked.

I am considering just mounting the 3 stacked PDX amps on a stainless plate down low in that space and buying the taller CD-Changer trunk trim (PN: 51477122411) with the access door (PN: 51477139441) as seen in Technic's post

Technic, If I mount down lower to the bottom of that space, do you think 3 stacked PDXs will fit in there? From your photo in that post, it looks like I could even fit those 3 PDXs stacked along with the alpine processor (about an 1.5" thick) on top and still clear in there with the taller trunk trim in place. I'd still need to work out the ventilation, that's for sure, but I'm just wondering if it will clear. Sure wish I had a depth measurement of that space with the taller CD-changer trim in place so I truly know what kind of space I have to work with there.
Yes, 3 stacked PDX will fit using the CD Changer trim... from the metal floor to the top of the trim. I still have my OEM amp below my 2 stacked PDX and the OEM amp is slightly taller that the PDX.

I don't know if you can get a processor on top of the 3 stacked as well and the PDX wires and RCA cables will be very tight, though.