View Single Post
      03-25-2010, 03:45 PM   #1
anthony @ eas
BimmerPost Supporting Vendor
anthony @ eas's Avatar

Drives: R56 Cooper S
Join Date: May 2009
Location: 4015 E Leaverton Court, Anahiem, CA 92807

iTrader: (0)

▀▄ eas | DIY: Macht Schnell e46 M3 Stage 1 Intake Charge Kit Installation

Macht Schnell e46 M3 Stage 1 Intake Charge Kit Contents
1 Intake Charge Pipe
1 Air filter
2 Euro-style clamps

Step 1
Unbolt the 4 nuts that secure strut tower brace.

Step 2
Remove strut tower brace.

Step 3
Disconnect MAF sensor connector.

Step 4
Unclip air box cover tabs.

Step 5
Unscrew intake elbow clamps.

Step 6
Remove air box cover.

Step 7
Remove filter.

Step 8
Remove intake elbow.

Step 9
Install Macht Schnell air filter.

Step 10
Install Macht Schnell Intake Charge Pipe. Do not tighten clamps yet.

Step 11
(Optional) Remove and clean MAF sensor.

Step 12
Install air box cover.

Step 13
Tighten Intake Charge Pipe clamps. DO NOT OVER TIGHTEN.

Step 14
Install strut tower brace.

Step 15