View Single Post
      01-17-2010, 01:13 PM   #18
sales@ESSTuning's Avatar

Drives: ESS M3 / M4
Join Date: May 2007
Location: AZ

iTrader: (6)

Originally Posted by Bluechipper View Post
Here is a tuner contest set up by EuroTuner magazine. A Gintani owner showed up with his SC M3. Results from the Gintani SC M3 were somewhat disappointing.

Anyone know the boost and fuel used in the dyno portion of the contest? The Gintani M3 put down 592whp on a dynojet. There is dyno results posted from an ESS VT2-600 kit putting down 635whp on a dynojet.

Sticky will be heading to the dragstrip on the 30th, to try put down a good time for Gintani. He is running very high boost and meth. Not exactly a mild streetable setup.
The dyno I posted of 600+ whp were not from a standard VT2-600 kit on a stock car. That car had a custom exhaust and a custom race tune designed to make max power on pump 93 octane @ 6.5 psi.