Originally Posted by STALKER
sparkyg weighed his Brembo 365/345 kit.
365 mm slotted rotor 24.5 lbs
6 pot monobloc front caliper 12 lbs
front caliper bracket 2.0 lbs
345 mm slotted rotor 15 lbs
4 pot rear monobloc caliper 8 lbs
Rear caliper bracket 1.5 lbs
All weights measured on digital scale used for shipping so prob +- 0.5 lbs
I believe Tom@EAS weighed his AP kit and posted on M3forum.com, I will see if I can find it.
There was a total savings of 9.70lb with the AP7100/7150s over the stock setup.
Weights and overview can be seen in our journal here: http://www.m3post.com/forums/showthr...es#post5309854