View Single Post
      11-06-2009, 05:47 PM   #5
chuckvic
Private First Class
1

 
Drives: 2009 M3 DCT Coupe
Join Date: Apr 2007
Location: el paso


Posts: 135
iTrader: (0)

Quick Fit Belts

Thanks for checking in with us on this. The quick fits are a very important part of our business since we came out with them. The problem is we need to do seatback testing for each model car we have a belt. When we did our initial introduction of belts the seats where tested in Germany now we need to test all new models we want made here in the states. The good news is we finally have the test lab to do these test for us so by next spring we should have a bunch of new belts on the market. The E90 is first on the test block so as soon as we have results we will get production rolling in Germany. The bad news is the 911 will not be getting a quick fit belt because the seats do not have holes for the shoulder belts to pass through. The only option for the 911ís is to get aftermarket seats with a harness bar or a roll bar. Please keep an eye on our site we will make it very clear once the E90 belts are on the way to us.





Thanks again



Jeffrey T. Paulk



HMS motorsport, Ltd.

9A Electronics Ave.

Danvers, MA 01923

978-774-1615 888-467-3269

978-774-1548 (Fax)

781-789-4456 (Cell)

jeff@hmsmotorsport.com /www.hmsmotorsport.com

jeff@schrothracing.com / www.schrothracing.com




--------------------------------------------------------------------------------

From: ME
Sent: Monday, November 02, 2009 5:45 PM
To: jeff@hmsmotorsport.com
Subject: quick fit belts



BMW E90 have been out since 2006 and there is STILL no belts avail??? 911ís have been out since 1965 and there are no quick fit belts avail????

THIS WAS MY QUESTION TO THESE COMPANY ABOUT QUICK FIT BELTS, SEE ABOVE FOR REPLY THAT SEEMS TO INDICATE OUR M3'S WILL SOON HAVE THESE BELTS.

CHUCK 2009 M3
87 911