View Single Post
      10-15-2009, 10:52 AM   #31
Mr.Metak2you
Brigadier General
 
Mr.Metak2you's Avatar
 
Drives: LEXUS LS(DailyDriver)
Join Date: Nov 2007
Location: Astral Projecting: ∞ 23.516 -122 02.625 0242.101 ĕv'rē-hwr'

Posts: 4,750
iTrader: (15)

Garage List
More detailed instructions:

Just got a PM from a member asking about exactly how I removed the boot from the stock knob:

First, I flipped the boot inside out. Then I just used a razor blade and cut all the way around, retaining as much of the material as possible by peeling it off the knob(since the stock knob will not be used again). You might be able to get about a 1/2 inch of extra material, you're gonna need it. Then you just zip tie from the inside and fold back down. Make sure you run the wire through the boot opening first otherwise you will be cutting the zipties and redoing this step. I used two of the smallest zip ties I could find at Lowes as to keep the lowest profile 'ring' from the outside. Less bulky! Hope this helps.

Name:  Ziptie.jpg
Views: 1535
Size:  137.4 KB
__________________
Mr.Metak2you is offline  
0
Reply With Quote