View Single Post
      07-20-2009, 01:05 PM   #30
Ron@Modbargains's Avatar

Drives: 996TT/ae86
Join Date: Aug 2005
Location: 1721 E. Lambert Rd #C, La Habra, CA 90631

iTrader: (3)

Send a message via AIM to Ron@Modbargains
Originally Posted by MrHarris View Post
VMR is hard to beat in sub 2k M3 wheel territory. Look better than stock with similar or slightly less weight.
I dont think it's less according to this link from 503 Alex:
19x9.5 at 25.5lbs

VMR 710's are going to be over 27.5lbs in the 19x9.5 ET22 in terms of weight.

I agree in the price range the Forgestars can't be beaten in this price point.

Strength: Flow Form cast - strength is high point 1500lbs per corner rating
Same technology Used on Formula 1 and Indy Cars. Advan/BBS which use same technology run upwards of $3000 for set, these are $1400 in your price range.

Data backup :
(STL REPORT 19x8.5 (PDF 35K)
STL REPORT 19x9.0 (PDF 35K)
STL REPORT 19x10 (PDF 35K)
STL REPORT 19x11 (PDF 35)

19x8.5 Approx weight 22.5 lbs
19x9.0 Approx weight 24.7 lbs
19x10. Approx weight 24.1 lbs


You can get the front with a 19x8.5 or 19x9, Rears you can do 19x10 or even 19x11 with 305 Tires. Custom sizes and offsets to your needs and specifications - so go agressive as you want or conservative as you want. Clears Big brake kits as well.

Pictures and links on it: http://www.**********