The offset that works with an 18X10 Square setup
View Single Post
05-13-2009, 02:33 PM
Drives: '08 E90 M3, '88 E30 M3
Join Date: Dec 2007
Here are some pics of 18x10s mounted with 285/30/18 V710s. These are for my E36, but I figured I'd mount them up just to check. The wheel offset is 40 and I have a 12mm spacer in front and 15mm spacer in the rear. The front fits just right with only 1 degree of negative camber (suspension is stock). There is a lot more room in the rear.
This should make for a pretty good autox setup. The smaller overall diameter helps quite a bit (increasing the effective rear gear ratio), which should help in the tighter sections.
View Public Profile
Find More Posts by attbimmer