View Single Post
      02-05-2009, 10:18 PM   #1
BimmerPost Supporting Vendor
Ryan@IND's Avatar

Drives: ACR
Join Date: Mar 2008
Location: Chicago

iTrader: (18)

Send a message via AIM to Ryan@IND Send a message via Skype™ to Ryan@IND
18" HRE Monoblock Track/Race Wheels - Designed by Fall-Line & Built by HRE


It is finally here. The Perfect Track Wheel....

These Satin Black Thing of beauty is designed by the good fellas at Fall-Line Motorsports and built by HRE for the sole purpose of Racing.

When Fall-Line set out to develop the perfect set of racing wheels, they had very specific goals. They had to build wheels that are reliable, strong and light weight with features dedicated towards racing, especially the Grand-Am Koni Challenge. The design study was strictly focused on minimizing unsprung weight and rotational inertia, as well as being sturdy and strong enough to withstand the rigors of the Grand-Am Koni Challenge.

The result is an 18" Monoblock wheel, built by HRE for Fall-Line...

The wheels are specifically designed for the Grand-Am Koni Challenge, which means that use 275/30-19 Hoosier Koni Racing slicks on all four corners for the perfect neutral handling. These wheels house the Monoblock (cut-in half and bolted together; Grand-Am regulations) brakes by Alcons in the front.

Here are the specs:
Material: 100% Forged Heat treated T6061 Aerospace Grade Aluminum
Front size/weight: 18 - 9.5 (20lbs)
Rear size/weight: 18 - 10.0 (20.5lbs)
- Big Brake Clearance (including Alcon / Brembo / Stop Tech)
- modified center for fast pit-stop / Wheel change
- weight reduction by material removal on hub / spokes
- built to work with both street lug bolts(extended) and studs for easy swap

Recommended Tire size: 275/35-18 on all four corners!

Colors: Currently in Satin Black / available in many other finishes.

Available through none other than WheelSTO!

Much Thanks to Mark, Steve and the crew at Fall-Line Motorsports for making all this possible and for the opportunity for us to offer them to the others.

Here are some pictures:

Material removed from the spokes for weight reduction while increasing strength.

More Material removed from the hubs to reduce weight.

18" HRE P43 Track wheels + Alcon Brakes on an E92 M3

Wheels in Action


Last edited by Ryan@IND; 02-06-2009 at 12:34 AM.