View Single Post
      12-17-2008, 01:41 PM   #97
Second Lieutenant
JR///M4's Avatar

Drives: 17' Tanzanite ZCP M4
Join Date: Feb 2008
Location: San Antonio, Tx

iTrader: (6)

C17Moosedriver the install is rather simple just make sure that you have WD40 Lubricant for the Rubber Hanger mounts to loosen and install the mufflers and a torque wrench to tighten the bolts to the proper lb. you will also need a 13mm and 15mm Socket. All of this info comes with the install instructions. You will use the same mounting hardware from the original exhaust. Install the ground wire to the same point where the original mount will attach to the Borla Mufflers. You Should not have any problems. Good Luck

2017 Tanzanite Blue ZCP M4
2011 Silver Stone M3