View Single Post
      08-26-2008, 11:01 PM   #4
Radiation Joe
Veni Vidi Vici
Radiation Joe's Avatar

Drives: '11 JB/BBe-6sp-e90
Join Date: Jul 2008
Location: Macungie PA

iTrader: (0)

Garage List
2011 e90 M3-Sold  [4.25]
2003 RS6 - Sold  [0.00]
2009 e90 M3 - Gone  [0.00]
2003 M3 SOLD  [0.00]
old 2002  [5.00]
Originally Posted by elmariachi View Post
Thanks Radiation Joe. I dont think the rear is a problem. I can get 8mm C&C hubcentric spacers here customed. Does going to 10mm on the front have any implication on rubbing or so forth? AFAIK, the front offset is 29. My rims are +35 offset so going to 10mm spacers would imply an extra 4mm on the front. Is this ok?
You won't have any problem with a 25mm offset in the front, especially with a 235 width tire. I do not recommend anything less than a 10mm spacer unless you use a special spacer like Turner sells

Read about Turner spacers


Dinan compliment of stuff plus PF rotors and RG63s. Enough for now.
Why, yes. I am an abrasive bastard.