View Single Post
      01-22-2014, 11:53 PM   #3
regular guy
Lieutenant Colonel
169
Rep
1,948
Posts

Drives: Sprint car
Join Date: May 2013
Location: California

iTrader: (0)

Naturally Aspirated Results

biggynuts01 / SWen

Car and Modifications:
  • 2008 BMW M3
  • Turner Test Pipe
  • Full CATLESS
  • Megan Axle-Back Exhaust
  • Green Filter
  • BPM Tune
  • 91 Octane
  • DCT
Conditions (Dynojet Weather Station):
  • Temperature:: 76.33 degrees F
  • Atmospheric pressure: 30.06 inHg
  • Humidity: 7%
  • Density Altitude: 1296 Ft.
  • SAE Correction: 0.969
  • STD Correction: 0.997
  • Uncorrected: 1.000
Results:
  • SAE Corrected: 357whp @ 8230 RPM, 266wtq @ 3720 RPM
  • STD Corrected: 367whp, 273wtq
  • Uncorrected: 368whp, 274wtq
Dyno Database:Individual Dyno Results:
Individual dyno results are shown below. The legend below has the following meaning:
  • Dyno Run: Dyno run file
  • Timestamp
  • Temp(F) = Temperature (Farenheit)
  • RelH = Relative Humidity
  • Pressure(Hg) = Barometric Pressure
  • DA(ft) = Density Altitude
  • IAT(F) = Intake Air Temperature (Farenheit)
  • WHP(unc) = Uncorrected wheel horsepower
  • WTQ(unc) = Uncorrected wheel torque
  • WHP(SAEd) = Dynojet SAE corrected wheel horsepower (SAE-1349)
  • WTQ(SAEd) = Dynojet corrected wheel torque (SAE-1349)


* Entry used for the Dyno Database

Graphs:

SAE Correction:

Dyno Chart:


Engine Vital Statistics:


Engine Vitals Combined:


STD Correction:



Uncorrected:


Last edited by regular guy; 01-24-2014 at 02:10 AM.