Quote:
Originally Posted by CalSE
First I have to give credit and thanks to EAS for assisting me in my set up.
Here is what I can remember:
-Apex EC-7 x 10.5 to clear the Brembo. Can't remember the offset but I requested for the "flush" stance.
-KW Clubsports at -3.5 front and -2.0 rear cambers. Front helper springs removed. Front springs replaced with shorter length but with same spring rate. I also think different collars were used.
-MS 5 mm spacers at front.
-Hankook 285/30/18 with no rubbing whatsoever.
-Hankook 285/35/18 with slight rubbing in the front plastic wheel well cover at about 180 degree steering wheel turn.
I hope this helps. If you want more details, I would suggest you call Kevin at EAS. I believe they have setup other M3s with 295 square!
|
18 x 10.5 et 25 square. I know your off sets more than you do. I'm certain of it. Lol