View Single Post
      08-23-2013, 11:51 AM   #33
TXmtrhed
First Lieutenant
TXmtrhed's Avatar
3
Rep
327
Posts

 
Drives: VO 1M
Join Date: Aug 2010
Location: Katy, TX

iTrader: (0)

Quote:
Originally Posted by mid-corner fun View Post
that's one of the reasons I haven't bothered with this yet. Interestingly enough, NASA NE's tech form makes a point about DOT FMVSS 209, doesn't simply exclude 4pt altogether:


NASA NE
Metal to metal seat belts securely mounted (driver and passenger) 4-POINT harnesses not meeting DOT FMVSS 209 ARE NOT PERMITTED.
5-POINT OR 6-POINT SAFETY HARNESS MAY NOT BE USED WITH STOCK
SEAT UNLESS PASSED BY TECH INSPECTION. The installation of non-factory restraint systems must meet
Manufacturers Safety Specificaions. ON VEHICLES IN WHICH A PASSENGER MAY BE CARRIED (ie:
STUDENTS REQUIRING INSTRUCTORS OR INSTRUCTORS CARRYING STUDENTS), THE DRIVER AND
PASSENGER SEATS AND RESTRAINT SYSTEMS MUST BE MATCHING.


PCA Sch
7. SEAT BELTS / SAFETY HARNESSES: Both driver and passenger must have the same level of
protection in both belts and seats. Harness guide bars must not be used as anchor points for belts. All
harness systems must include a properly secured antisubmarine strap, must be used with a seat having
appropriate routing holes, and should be used in conjunction with properly padded roll bar or cage.
Shoulder strap angle must be no more than 40 deg. from horizontal. No 4-point harnesses allowed.
All cars running with open tops MUST have full harnesses and arm restraints.

PCA RTR
No mention of 4pt on their tech form, skips from 3point factory to 5/6 point race setup in conjunction with rollbar/cage, 4pt prob not allowed here either
Regarding PCA, at least with the Lone Star Region, the tech form states "4-point harnesses prohibited except Schroth Quick Fit."
__________________