View Single Post
      07-23-2013, 05:46 PM   #19
ApexRaceParts
BimmerPost Supporting Dealership

 
Drives: M3
Join Date: Jun 2012
Location: Bay Area

Posts: 765
iTrader: (0)

Quote:
Originally Posted by Millie View Post
What width do you recommend, the 10" or 10.5? What is the max amount of tire (squared) could I get on the 17" for autocross use only.

Thanks!
We would recommend the 17x10" ET25 with 275/40/17 tires. This car is running 275/40/17 Toyo R888's which are very meaty. No camber plates are required to run these wheels and tires, and no spacers are needed either.



You could potentially run the 17x10.5" wheels all around but it is a very difficult fit for the front. The 17" wheels sit much closer to the strut tube, so a thick spacer will be required. Additionally, camber plates will likely need to be maxed out to prevent rubbing on the fender. We do not recommend this setup, but it is possible with the correct amount of work put into the setup.

Feel free to ask us anything else you might have questions about!
__________________
| Product Specialist | Phone: 925.245.0773 | Email: info@apexraceparts.com |

Website |Facebook | Instagram |Blog |

Last edited by ApexRaceParts; 07-23-2013 at 06:43 PM.
ApexRaceParts is offline  
0
Reply With Quote