View Single Post
      06-19-2013, 03:46 PM   #8
M3PO
Colonel
 
M3PO's Avatar
 
Drives: '08 IB E92
Join Date: Sep 2011
Location: OC

Posts: 2,738
iTrader: (7)

Quote:
Originally Posted by edwinm3 View Post
I just can't live with the fact that it doesn't matter how thin the tape is you can always see a slight gap. And I'm not new to this. I use tape on the splitters and the diffuser but not on the spoiler. What I do is grab a medical syringe cut the plastic tip off and use it to lay the glue nice and thin. Once you press on it it'll spread and practically no or very little comes out. Comes out great.

Just removed one I applied to my E90 using my technique and came off pretty easy with a string, sawing thru the betalink.
FYI betalink doesn't get rock solid it turns into a hard rubber when dry
My spoiler has virtually no gap at all. To the point where you can't see the tape at all. Usually this bothers me also, but it's not an issue at all with the Performance spoiler. It has a little lip that hides the tape (or a recess where the tape sits, I forget).
__________________
2008 IB E92 M3| BBS | KW | Arkym | Platte Forme A.G. | Active Autowerke | K&N | Fabspeed | Dinan | Evolve-R
M3PO is offline  
0
Reply With Quote