View Single Post
      06-13-2013, 03:34 PM   #22
Agent-GHQ's Avatar

Drives: '13 AW ///M3 E92 MT Comp Pkg
Join Date: Jul 2009
Location: San Diego, CA

iTrader: (0)

Originally Posted by VMcV3y View Post
Okay, so your info-block reads that your M3 is in Production.

The first thing you should do is find a downloadable owner's manual and read it from front-to-back, twice. You will learn all sorts of things you need to know, and all sorts of things you will never need to know. But chances are, almost all answers to your questions are either in the manual, or have been discussed one-hundred billion times on this particular forum.

Good luck!

- V

Good point!

Originally Posted by m6pwr View Post
Actually, zinc/phosphorous (aka zddp) forms the anti-wear film rather slowly (studies have shown it can take up to 3k mi for fresh oil) which I think is why Castrol TWS has so much of the complimentary anti-wear adds titanium and boron which activate much faster and also form a very hard anti-wear film on metal parts. Sometimes less is more and I think that's the case with zddp. It has its downsides: the zinc "carrier" drops deposits, and higher concentrations of zddp increase friction. You only need enough to protect the engine. I think Castrol TWS has the right amount of zddp and other AW adds. It's a pretty slick formulation.

As far as aftermarket additives: Tell a lubricant engineer or formulator that you want to pour in an aftermarket additive to improve his oil, and watch him come unglued. Motor oil is a chemical soup where any of the many different chemicals can affect the performance of the others. Formulating a motor oil is a chemical balancing act and adding aftermarket additives can affect that balance negatively. The International Council for Machinery Lubrication has several training courses that include the question, When is it OK to dissolve an after market additive in an oil? Correct answer: Never.
Interesting insight!

Castrol 10W-60 it is then!