View Single Post
      04-07-2013, 08:06 AM   #30
dogbone
Second Lieutenant
 
dogbone's Avatar
 
Drives: '09 E90 M3 - IB
Join Date: Feb 2012
Location: 93 million miles from the Sun

Posts: 273
iTrader: (0)

Quote:
Originally Posted by Drifty// View Post
Does anyone happen to have good info on whether the AP Racing kit fits Apex ARC-8 18x10 ET25 wheels? Those are my track wheels (both front & rear). I have a set of 18x10 ET25 EC-7's for street, but the BBK - Wheel Fitment Compatibility Database thread already tells me that fit works.

Saw so many Apex wheels at the last track event. Someone must know...
I have AP Racing on all four corners and run ARC-8 wheels. I run 9.5" front and 10.5" rear. No problems. (My 9.5" wheels fit on the rear fine. I tested it out in case I had a flat in the rear at the track. I bring street fronts with me as a safety. So, if I have a flat in the front, then I replace the fronts with my street fronts. If I have a flat in the rear, I move my track fronts to the rear and put the street fronts on the front.)

I have been told directly from APEX, that all ARC-8 18" wheels with the M3 fitment fit over all brakes except Brembo 380mm. EC-7 is able to go around Brembo 380 as well. (I don't know if ARC-8 would go around that larger AP rotor though. I didn't even know about that rotor until I saw it posted above.)

Last edited by dogbone; 04-07-2013 at 08:16 AM.
dogbone is offline  
0
Reply With Quote