View Single Post
      03-16-2013, 08:57 PM   #4
j2m's Avatar

Drives: '11 E92 M3 DCT
Join Date: Jun 2011
Location: Calgary, Ab

iTrader: (8)

Garage List
2011 BMW E92 M3  [5.00]
Originally Posted by Arben72 View Post
Well your other choice is 3m double sided tape. If you do your spoilers in that they will probably fly off at high speeds. The mirror caps clip in so no worry on those.
Some dealers use betalink and some use 3M. I just removed my OEM spoiler and replaced with performance spoiler and the OEM spoiler was attached using 3M tape.
I have ALWAYS used 3M double sided tape for spoilers, splitters, fins, diffusers and have had ZERO problems. If it is applied correctly, it WILL NOT fly off, even at high speeds. If it is installed incorrectly it could fall off in extreme heat or cold.
TO install correctly the tape as well as (both) mounting surfaces needs to be heated up with a hair dryer or heat gun before mounting.

11' E92 M3 Space Grey | DCT | ESS VT2- 625 | Gintani Race (valved) + Quad Res Catless X-Pipe | KW Sleeve's | GC Camber Plates|Arkym Diffuser | Vorsteiner VRS Lip | P3 Boost Guage | Stud Conversion
PHOTO's: Click Here ESS VT2 625 PHOTOS: Click Here