View Single Post
      03-09-2013, 08:55 PM   #205
froz_v
Lieutenant
froz_v's Avatar
Taiwan
7
Rep
519
Posts

 
Drives: AW/FR ///M
Join Date: Nov 2009
Location: Vancouver

iTrader: (5)

Garage List
hey guys, I'm looking of some advice on how to run my setup

I got a set of TE37's from my previous non-M but these were quite aggressive on my original car so I am wondering if they will work on a Mcar

The specs are
18x9.5 +28 I assume this will be for the front, and will these work with 265/35/18?
18x9.5 +22 currently have 265/35/18 PSS on them

So what I was thinking is:
1) run square setup of 265/35/18 on all
2) to put the 265/35/18 tires on the front and use 285/35/18 but will the 285 width be too wide for 9.5" rims?

Also, will I need spacers to prevent rubbing on the suspension struct?

I am currently on stock ZCP ride height which I think is 10mm lower then reg M3. I am not looking for the stretch and poke look but something that is optimized for this car to decrease unsprung weight and increase rear traction.

My goal is to have the best setup for daily and I can use it for track as well. Advice from you guys will be greatly appreciated as I am very new to Mcars and very excited to bring it to my first track day when spring/summer comes.
__________________
11 E90 ///M ZCP
09 E92 335xi M-sport
06 Porsche Cayenne S
08 E90 328xi Gone but will never be forgotten!