View Single Post
      03-07-2013, 08:31 PM   #30
2018 track days - 0 ridge 1:52:24 pacific 1:33:30
1MOREMOD's Avatar

Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

iTrader: (5)

Originally Posted by biggynuts01 View Post
Did you have to remove your studs? I recently installed studs with loctite and I will need to change my rear rotors in about 15k miles.
I changed my studs at the same time so didn't have that to worry about. The rotor should still come off by slipping over the studs as they are threaded into the hub assembly thru the rotor. Might require some wiggling to pull em and the caliper carrier would be in the way also at that point. Might have to remove that unlike my route.

02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|