Thanks to everyone who gave input on spacers; using almost exclusively the TMS linked guide and this thread (since I am a novice) I am trying to order spacers and had some questions.
1. From this thread, it appears that with my current setup, stock 220m 19" wheels and 255/275 19" Vdredstein Ultrac Sessentas, I will be fine with TMS 12.5MM front spacers and 5MM rear spacers; correct? (BTW- I measured the gaps and I don't think there should be any issues.)
2. I have 25MM stock bolts; I plan on ordering the longer bolts.
3. With a 5MM rear spacer on the back, will I have issues with the stock hub without an extender? TMS notes in the article there are extenders for 10MM or up, is one necessary for 5MM? If yes, is there an extender available?
4. Are there wheel locks available for the longer bolts? If there are, hopefully it is not two different orders because of the different spacer sizes.
AA Pulley, Air Filter and Tune - Full Evolve Valvetronic Exhaust - 380/355 Stoptech BBK and other fun stuff.