View Single Post
      02-27-2013, 10:10 AM   #1
ortho281's Avatar

Drives: 2011 E92 M3 6MT
Join Date: Aug 2010
Location: Katy, TX

iTrader: (0)

Rubbing with 10mm spacer!

Anyone else experiencing rubbing with 10 mm rear spacers? After switching from Eibach springs to KW adj sleeves, I noticed that my rear tires are now rubbing the rear bumper. The rear is now 0.5'' lower than height with the Eibach springs (13.0" from hub center to fender). Alignment is same as previous (camber -2.5f/-2.0r). I have since switched to using a 5 mm spacer instead, but prefer the look of the 10 mm spacer. MS does not make a 8 mm spacer and I dont want to combine 3+5 mm spacers because wheel will not longer be centered by hub.

Any suggestion? Thanks!
Attached Images

Akra Evo / MS stage 2 / MS UDP / VF Tune / KW Clubsports Coilovers / Vorshlag plates / TMS Delrin Bushings / ST 380/355 BBK / ST SR34 pads / Apex Arc-8 / Nitto NT01 / APR splitter and wing / Cantrell Motorsports half cage / Recaro Profi / Schroth Profi II-6 / BMW Performance Alcantera wheel / Aim Solo DL

Last edited by ortho281; 02-27-2013 at 02:40 PM.