View Single Post
      02-16-2013, 11:26 AM   #3
Drives: '09 E90 M3 SG DCT
Join Date: May 2005
Location: Chicago

Posts: 50
iTrader: (0)

I had a hard time getting these off too. There are tabs on both sides of the piece that you need to push inward. The hard part is finding something thin enough slide in and not scratch the paint. I used a tiny flathead screwdriver wrapped in electrical tape. I ended up breakinf one of the tabs and had to glue it back together .. ugh. Obviously, it's much easier if you just remove the bumper
byunts is online now  
Reply With Quote