View Single Post
      02-15-2013, 01:53 PM   #14
BimmerPost Supporting Vendor
Malek@MRF's Avatar

Drives: E92 M3, 991 P-Car
Join Date: Jan 2008
Location: Irvine, California

iTrader: (5)

Send a message via AIM to Malek@MRF
Originally Posted by BimmerRob08 View Post
Yep, no spacers. Running ARC-8's 9.5" F & 10.5" rears with the right size tires. All bolts torqued in sequence to 90 ft-lbs. But all even. New tires, road force balanced. Hub face to wheel face all cleaned up and anti-size only on the protursion because I whipped it pretty much clean off the hub face. I even watched my tech at BMW measure the run-out of the hubs, wheels, checked all ball joints, suspension, tie arms, etc. No idea's at this point. Brakes are a different issue being addressed with AP and their tech support so I think its two different issue's I'm having compared to the Op.
Most likely it's the wheels. They may not be 100% true.

What kind of tires are they? If you could provide this information, I could most probably tell you what your problem may be definitively. I deal with these cars everyday.