View Single Post
      02-11-2013, 12:12 PM   #5
BLACK OPS
Captain
 
BLACK OPS's Avatar
 
Drives: E92 M3 6MT
Join Date: Sep 2011
Location: CO, USA

Posts: 816
iTrader: (0)

Below is the link I previously posted about this. You should first use the center jackpoint in the front of the car to place one or both of the front jack stands, then jack the rear (using adequate load bearing point) to place the rear jack stands. If you place rear jackstands first you might find it difficult to fit the jack itself under the car in the front. If you don't have the Torin T43004 type jackstand and you have regular stands then you can use hockey pucks, or in my case I just used 2"x4" boards overlying the plastic BMW jack points, which have held up great but take some balancing when lowering the car down onto them.

http://www.m3post.com/forums/showthread.php?t=693099
__________________

2011.5 Jet Black E92 ///M3: ZCP|6MT|BB|DINAN|EVOLVE|BPM|VORSTEINER|BMW PERFORMANCE|IND EDITION|TMS|LUX 5K|APEX|
BLACK OPS is offline   United_States
0
Reply With Quote