I have a 2011 E92 M3 that I recently got 19" Morr VS8.2 wheels for. I also ordered OEM TPMS sensors and valve stems. The problem is that I test fitted everything and the threaded collar on the BMW valve stem does not appear to thread on the valvestem far enough. I do not want to over tighten it, and risk breaking anything. Does anyone have any ideas or suggestions? I went to my local dealer and there are no washers available (from BMW anyway) to fill the space. I have seen aftermarket TPMS with with a seperate spacer/washer, but I thought the BMW unit would be my best option.
Thanks in advance!