View Single Post
      01-29-2013, 01:59 PM   #375
robert @ eas
BimmerPost Supporting Vendor

Drives: BMW
Join Date: Nov 2011
Location: 4015 E Leaverton Court, Anahiem, CA 92807

iTrader: (0)

Originally Posted by nrand001 View Post
I recently took off spacers from the front and rear (F:18mm & R:15mm). I specifically targeted the rear because my 295/30/19 (Yokohama advans) on my right side was too close to the fender. I am considering on putting either the 15mm or 18mm in the front now? Any suggestions? Is it ok to just have a pair of spacers on the front? If so, which ones would suffice on my current setup? Trying to maintain that aggressive look!

I would suggest going with the 15mm in the front unless you have measured or didn't previously have any issues with the 18mm being in the front and like the way that looked.

Originally Posted by KudosM3 View Post
OEM 220's on H&R and Michelin OEM sizes

Will I rub on 15F 12R?
We have put in 15mm FRONT and 12mm REAR spacers on plenty of e92 M3s and have not any issues.