Thread: replacing studs
View Single Post
      01-29-2013, 12:32 AM   #12
1MOREMOD
2014 Track Days - 10|Ridge 1:52:24|Pacific 1:35:72
 
1MOREMOD's Avatar
 
Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

Posts: 12,191
iTrader: (5)

Quote:
Originally Posted by Richard@M-World View Post
As others have said... Loctite basically glues the studs on the hub and breaking the bond takes a lot of work. Also, some double nuts may slip on the threads...

Turner studs have hex heads, but they are not designed to withstand the torque of removing the studs.

It's not impossible, just so you know what to expect. Get a long open-ended wrench would be my advice!
so the loctite they came with was the red right? sounds like fun. any other hints. torch?
__________________

02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs|
1MOREMOD is offline   United_States
0
Reply With Quote