View Single Post
      01-27-2013, 11:12 PM   #68
Longboarder
Brigadier General
 
Drives: 2013 e92 M3
Join Date: Dec 2006
Location: Monarch Beach

Posts: 3,717
iTrader: (1)

Garage List
2011 997.2 Turbo S  [4.71]
2013 e92 M3  [4.55]
2013 WRX STi  [4.00]
2013 BMW X5  [0.00]
Quote:
Originally Posted by bigjae1976 View Post
Unless you are shifting early, I don't see how you're engine isn't heat soaked. I used shift my 330 early as an intermediate driver. It ran hard all day long. When I got into the advanced run group, I keep that tach pinned on the redline. I have an heavily upgraded cooling system, w/a injection, heat exchanger, push and pull fan. I'd get heat soak by the second session.

I have temp issues with my m3 stock. The DCT starts getting slow and my redline pulls. I don't see how adding an inter cooler with a 50% bump in power won't heat soak the intake charge?
I've done 3 track sessions (one on a very low speed track and two on a high speed track) with my M3 and went all out every time. Even did a 15 minute straight drift session on the first track day...the first 10 being with a professional drifter who just scorched my car on a crazy 8 skid pad. Did a bit over 100 laps in all which isn't all that much. However did a couple sessions of 15 or more laps and other than frying the stock brakes, the car performed flawlessly with oil temps in check. Temps were cool out so that could be a important factor so I will keep my eye on oil temps as it gets warmer out. Maybe this ESS kit is just over-enginerred.
__________________
Daily: 2013 e92 M3 DCT / ESS VT2 650 S/C / Akrapovic Evolution / StopTech BBK
Track/Airstrip: 2011 997.2 Turbo S PDK / 725 HP / BBi suspension build
Beater: 2013 X5 3.5sport
YouTube Channel: https://www.youtube.com/channel/UCT1...eoFBszPIK0gf9w
Longboarder is offline  
0
Reply With Quote