Originally Posted by JD3
Hi guys, I've got CF splitters (the two that go on L and R) and they have depressions on the bottom where screws would go but no holes. No, these were not bought off eBay
Question is, do I drill pilot holes? If so, what size hole and what size screw? I know this stuff is strong but brittle and the last thing I want to do is to crack the CF obviously.
Thanks for any advice
Mine came the same way... There's one screw underneath the bumper already.. instructions say to use 2 screws, but I might try just the one (and not drill into my bumper for the second hole), and some extra 3M tape.
I might try it this weekend in the cold haha. I'll let you know how it goes.