View Single Post
      12-27-2012, 01:12 PM   #3
surlynkid
Captain
 
surlynkid's Avatar
 
Drives: 2013 E92 M3
Join Date: Apr 2012
Location: League City, TX

Posts: 845
iTrader: (1)

Garage List
Thanks. Yes, I found 83 ft lbs straight off my bolt torque charts for that size and grade bolt. That is close to the 81 ft lbs you quote.

The deal about replacing those bolts is not necessary. They are not stretched like head bolts. Just use the correct tap and die to clean the residual thread locker off, then clean it up with brake cleaner, let it dry and then use fresh red lock tite. Replacing the bolts after 3400 miles is ridiculous.
__________________
Stoptech 380mm/355mm | Pagid RS-29 | Akrapovic EVO - CF tips | Benvo Tune | MS UDP | AA air filter | Apex EC-7 18x10 square 275/35-18 NT01 | 90mm Turner Studs | GT4 Brake Cooling | GT4 Power Steering Cooling | Performance Steering Wheel | CF Mirror Caps | CF Spoiler | Varis System 1 Full CF Diffuser | Extended Paddle Shifters | Schroth Quick Fit | Vorshlag Camber Plates | AiM Solo DL
surlynkid is offline  
0
Reply With Quote