Originally Posted by M3SQRD
I was able to run a 15 mm spacer with my 219M F 18x8.5et29 with room to spare (wasn't going for a flush fitment). This means you'd have to run at least a 20 mm spacer depending on how aggressive of a fitment you are trying to run. Your rear 10et25 is fine or, for a more aggressive fitment, you could run a 5-10 mm spacer on the rear.
Ah, OK. That makes sense, given the numbers. I'm not really looking for an aggressive spacing. Rather, I just want to account for the normal amount of offset I might be missing with standard wheels. I don't want the wheels to be too tucked, ya know?
Good info. Thx.