View Single Post
      12-04-2012, 12:59 PM   #29
ortho281
Captain
 
ortho281's Avatar
 
Drives: 2011 E92 M3 6MT
Join Date: Aug 2010
Location: Katy, TX

Posts: 646
iTrader: (0)

Quote:
Originally Posted by Munit View Post
Its not that intakes on many other cars do not add some flow and power but it simply does not on this car. The intake is a better design than any aftermarket or OEM intake in history. It is ridiculously over-engineered with the design of intake flow. A huge lower ram air duct on the bottom drivers side, ram air through the grilles and a hood vent for air escape to keep the velocity moving bringing it cool air and than at higher speeds reversing the use as air intake is drastically needed at high rpms and being able to use that hood vent as a third source of fresh cool air.

Also an elbow does not work different with a paper filter. A paper filter is a true restriction and even that yields only a 5hp gain. Simply put there is a limit to how much air a engine needs and given it is supplied with that its not making more HP with more air.

The filter does not create more power because it flows "more" air, but rather easing the restriction means the engine does less parastic work to draw the air through the filter and thus frees up a few hp. This does not apply with an elbow as there is actualy more work to suck more stagnant, lower velocity air from a larger diameter tube than it does to suck higher velocity air through the smaller OEM diameter.

So really the best combo is the OEM elbow with its higher velocity air moving and a oiled filter to get rid of the work the engine does to suck air in.

This intake is an engineering marvel in itself.
I agree that the OEM intake on the S65 is much better that other cars out there. A larger intake may increase hp at higher RPM's, but also may decrease hp at lower RPM's due to a lower intake velocity. The OEM intake is very good and probably sufficient but I still prefer the sound of the MS intake.
__________________

Akra Evo / MS stage 2 / MS UDP / VF Tune / KW S/O springs / Vorshlag plates / ST 380/355 BBK / ST SR34 pads / Apex Arc-8 / Nitto NT01 / Cantrell Motorsports roll cage / Recaro Profi / Schroth Profi II-6 / BMW Performance Alcantera wheel

Last edited by ortho281; 12-04-2012 at 02:42 PM.
ortho281 is offline   United_States
0
Reply With Quote