View Single Post
      12-03-2012, 10:57 PM   #3

Drives: M3
Join Date: Feb 2012
Location: Tri-State

iTrader: (0)

Originally Posted by ortho281 View Post
After doing a little searching I was able to find these posts which might answer my question. The spring diameter with the KW kit appears smaller than the OEM springs. This could affect the fit with spring perch on the Vorshlag camber plate.
I had KW Sleeves and they worked well on the track when struts were new. However, if your struts are even showing slight signs of wear, the KW sleeves will exacerbate the issue immediately. You will get that squishy damper feeling especially on slightly bending fast straights - and that is not confidence inspiring. Also, at this point you'll feel the suspension tramp pretty harshly on normal streets, also something I did not like. Funny thing is, I'm thinking of putting on Eibach Pro Kits on the new M vs. Sleeves.

Are they becoming too soft for you and is the Eibach height not low enough? I see you have the Pro Kit.