Mounted NT01's no rubbing
I Just got the NT01's mounted and as most have said there is no rubbing, even with 10 mm spacer on rears. Front camber is -2.5 and rear is -2.0 with 10 mm spacer. I will post impressions of the difference of NT01's vs. RS3's after next HPDE.
Akra Evo / MS stage 2 / MS UDP / VF Tune / KW S/O springs / Vorshlag plates / ST 380/355 BBK / ST SR34 pads / Apex Arc-8 / Nitto NT01 / Cantrell Motorsports roll cage / Recaro Profi / Schroth Profi II-6 / BMW Performance Alcantera wheel
Last edited by ortho281; 11-21-2012 at 09:54 PM.