View Single Post
      11-06-2012, 01:53 PM   #9
ortho281's Avatar

Drives: 2011 E92 M3 6MT
Join Date: Aug 2010
Location: Katy, TX

iTrader: (0)

Originally Posted by Protocav View Post
I run the NT-01 in 275/35-18 on a 9.5 ET24, but get about 6mm of tire bulge that you wont get on a 10" wide wheel. The end result is that I probably have about the same frontspacing as your 10 ET25 package does, and I don't have any rubbing whatsoever at -1.5 degrees of camber.

The Nt-01 in 275 fits exactly like a 285.
Thanks for sharing. I decided to increase front camber to -2.5, mainly to increase front grip in slow corners. I kept the rear at -2.0 and increased rear toe to 0.07 to increase stability exiting corners. I still have another weekend on RS3's, so can't eval NT01's until the following event.
Attached Images

Akra Evo / MS stage 2 / MS UDP / VF Tune / KW Clubsports Coilovers / Vorshlag plates / TMS Delrin Bushings / ST 380/355 BBK / ST SR34 pads / Apex Arc-8 / Nitto NT01 / APR splitter and wing / Cantrell Motorsports half cage / Recaro Profi / Schroth Profi II-6 / BMW Performance Alcantera wheel / Aim Solo DL