View Single Post
      11-05-2012, 04:50 PM   #9
Porschefile's Avatar

Drives: E92 M3
Join Date: Jul 2008
Location: Tennessee

iTrader: (7)

Originally Posted by Richard@M-World View Post
This probably just means that you are working your tires to the maximum!

When I ran 3+ degrees of camber with AD08, the outer edge still wore out just like yours. Sometimes with a heavy car like ours, outer edge wear is unavoidable. It may help to control the platform more by adding springs/roll bars, but probably not something you want to do on a street car.
I'll go with that

I already have 514/800# springs, but stock front bar. Do you think a stiffer bar would help?

I've also had thoughts that the stiff rebound of my dampers is contributing, but backing it down a few clicks made it understeer to the point that I didn't care about tire wear, I had to change back.