View Single Post
      11-01-2012, 09:58 PM   #1
ortho281
Captain
ortho281's Avatar
United_States
11
Rep
683
Posts

 
Drives: 2011 E92 M3 6MT
Join Date: Aug 2010
Location: Katy, TX

iTrader: (0)

Switching from RS3's to NT01's. Any clearance issues?

I am switching from 275/35-18 RS3's on ARC 18x10 ET25 to same size NT01's.
Camber: f -2.1/r -2.0
Since the tread on NT01's appears to be significantly wider than on RS3's, should I expect some rubbing on fronts? What front camber are people running to resolve clearance issues? The clearance with RS3's and -2.1 front camber is minimal. Rears will not be an issue, as I actually use a 10 mm spacer on rears with RS3's.
__________________

Akra Evo / MS stage 2 / MS UDP / VF Tune / KW Clubsports Coilovers / Vorshlag plates / TMS Delrin Bushings / ST 380/355 BBK / ST SR34 pads / Apex Arc-8 / Nitto NT01 / APR splitter and wing / Cantrell Motorsports half cage / Recaro Profi / Schroth Profi II-6 / BMW Performance Alcantera wheel / Aim Solo DL

Last edited by ortho281; 11-01-2012 at 10:06 PM.